Replacement Parts

Distillation is the process of separating the component or substances from a liquid mixture by selective evaporation and condensation. Distillation may result in essentially complete separation (nearly pure components), or it may be a partial separation that increases the concentration of selected components of the mixture. In either case the process exploits differences in the volatility of the mixture's components. In industrial chemistry, distillation is a unit operation of practically universal importance, but it is a physical separation process and not a chemical reaction.

1 - 47 of 47 items
Sort By:
Ai T1 Jackhammer Dual-Jacketed Glass Vacuum Cold Trap Ai Large Chamber T1 Glass Vacuum Cold Trap with 24/40 Joints Glass Cold Trap (Dry Ice) Condenser for Ai T1 2L Cold Traps
Ai T1 Jackhammer Dual-Jacketed Glass Vacuum Cold TrapAi Large Chamber T1 Glass Vacuum Cold Trap with 24/40 JointsGlass Cold Trap (Dry Ice) Condenser for Ai T1 2L Cold Traps

Dual-jacketed design gives you 2X condensing areas. Jackhammer style connectors allows you to connect multiple traps on same platform

New larger 24/40 joint vacuum connectors for maximum throughput. Ridged dry ice container with larger diameter increases surface contact and dry ice volume.

No chillers needed, utilizes dry ice for optimal efficiency. Specially made for Ai T1 glass cold traps

$799.00

$699.00

$590.00

Ai T1 Glass Vacuum Cold Trap for Safe Vacuum Operations Glass Cold Trap Coil Condenser for Ai T1 2L Cold Traps Ai T1 Glass Vacuum Cold Trap with Cooling Coil & 24/40 Joints
Ai T1 Glass Vacuum Cold Trap for Safe Vacuum OperationsGlass Cold Trap Coil Condenser for Ai T1 2L Cold TrapsAi T1 Glass Vacuum Cold Trap with Cooling Coil & 24/40 Joints

Utilizes dry ice for optimal efficiency. Comes with scissor jack for easy collection flask removal, recommended to use with our CleanVac scroll pumps and SuperVac oil vane pumps.

Specially made for Ai T1 glass cold traps

No frequent dry ice replacement required

$599.00

$590.00

$699.00

Ai 24/40 Heavy Wall 2L Round Bottom 2-Neck Flask Ai 24/40 Joint Male to Female Glass Adapter Ai 2L Heavy Wall Short Path Distillation Head w/ Straight Drain
Ai 24/40 Heavy Wall 2L Round Bottom 2-Neck FlaskAi 24/40 Joint Male to Female Glass AdapterAi 2L Heavy Wall Short Path Distillation Head w/ Straight Drain

Fits our 2L short path system. Glass material: high borosilicate glass 3.3

Recommended to use with Summit Fraction Finder

Larger vacuum jacket, increased internal diameter for more zero clogging, fine-grinded joints for higher vacuum. 75% more efficient than its predecessor

$150.00

$50.00

$390.00

Ai 2L Heavy Wall Short Path Vacuum Jacketed Distillation Head APIEZON PFPE 501 High Temp Low Vapor Vacuum Lube Grease 100g Ai 24/40 Glass Thermowell w/ Viton Gasket for 2L, 5L, 10L System
Ai 2L Heavy Wall Short Path Vacuum Jacketed Distillation HeadAPIEZON PFPE 501 High Temp Low Vapor Vacuum Lube Grease 100gAi 24/40 Glass Thermowell w/ Viton Gasket for 2L, 5L, 10L System

14/20 thermo port, diagonal recirculating fluid ports, five sets of vigreux.

Recommended for our SolventVap rotary evaporators and short path distillation systems.

Made specifically to fit Ai 2L, 5L and 10L boiling flasks

$250.00

$180.00

$50.00

Ai 24/40 Joint 75° Glass Three-Way Tee Adapter Ai 24/40 Joint Male to Male Glass Adapter 8 x 8 mm Raschig Ring for Packable Short Path Distillation Head
Ai 24/40 Joint 75° Glass Three-Way Tee AdapterAi 24/40 Joint Male to Male Glass Adapter8 x 8 mm Raschig Ring for Packable Short Path Distillation Head

Recommended for our short path distillation systems

Recommended for our short path distillation systems

Proper distribution of rings allows for greater efficiency during fractioning

$50.00

$30.00

$70.00

PTFE 24/40 to KF25 Flange Adapter with Viton O-ring Ai PTFE 24/40 Joint Sealing Sleeve for Air Tight Vacuum Work Ai PTFE 34/45 Joint Sealing Sleeve for Air Tight Vacuum Work
PTFE 24/40 to KF25 Flange Adapter with Viton O-ringAi PTFE 24/40 Joint Sealing Sleeve for Air Tight Vacuum WorkAi PTFE 34/45 Joint Sealing Sleeve for Air Tight Vacuum Work

Recommended with our new T1 cold traps and Clear series short path distillation systems

Increase vacuum level, allowing you to achieve better results

Increase vacuum level, allowing you to achieve better results

$90.00

$30.00

$40.00

PTFE 14/20 Joint Thermometer Adapter with Viton O-ring PTFE 24/40 Joint Thermometer Adapter with Viton O-ring Traceable Kangaroo 300°C Digital Thermometer with 4" SST Probe
PTFE 14/20 Joint Thermometer Adapter with Viton O-ringPTFE 24/40 Joint Thermometer Adapter with Viton O-ringTraceable Kangaroo 300°C Digital Thermometer with 4" SST Probe

Lower extracting nut allows you to remove adapter from flask with zero effort. Recommended for our Clear series short path distillation systems.

Lower extracting nut allows you to remove adapter from flask with zero effort. Recommended for our Clear series short path distillation systems.

42-inch probe cable, °C and °F switchable, battery operated. Recommended for our short path distillation systems. Comes with a multi-point calibration certificate.

$60.00

$80.00

$50.00

Dow Corning 5.3 Oz Colorless High Vacuum Sealing Grease (Tube) 537°C 1/2" Fiberglass Rope for Insulating Boiling Flask Ai 1/2" Insulated Chiller Translucent Silicone Tubing - 6 Ft
Dow Corning 5.3 Oz Colorless High Vacuum Sealing Grease (Tube)537°C 1/2" Fiberglass Rope for Insulating Boiling FlaskAi 1/2" Insulated Chiller Translucent Silicone Tubing - 6 Ft

Recommended for our SolventVap rotary evaporators and short path distillation systems. FDA 21 CFR 175.300 certified.

High-temperature, ultra-conformable, recommended for our short path distillation systems

Recommended for our C series chillers.

$25.00

$30.00

$25.00

3/8" White Premium Food Grade Silicone Vacuum Tubing 3/8" Reinforced Food Grade Vacuum Chilling Tubing -60C to +135C Egg Shaped 1.5 Inch Magnetic PTFE Coated Stir Bar - 1 Pair
3/8" White Premium Food Grade Silicone Vacuum Tubing3/8" Reinforced Food Grade Vacuum Chilling Tubing -60C to +135CEgg Shaped 1.5 Inch Magnetic PTFE Coated Stir Bar - 1 Pair

Recommended for our vacuum ovens and vacuum pumps. Made in the USA

Flexible, acid & alkali resistant temperature & pressure-resistant tubing, recommended for our vacuum pumps and recirculating chillers. Made in the USA

Great for round bottom flasks, ensures complete mixing. Recommended for our 2L, 5L and 10L short path distillation systems

$25.00

$30.00

$15.00

Ai 35/20 Heavy Wall 1000mL Round Bottom Receiving Flask Ai Solid PTFE 24/40 Joint Stopper for Air Tight Vacuum Work Ai Solid PTFE 34/45 Joint Stopper for Air Tight Vacuum Work
Ai 35/20 Heavy Wall 1000mL Round Bottom Receiving FlaskAi Solid PTFE 24/40 Joint Stopper for Air Tight Vacuum WorkAi Solid PTFE 34/45 Joint Stopper for Air Tight Vacuum Work

Fits our T1 glass cold traps and SolventVap 2L rotary evaporators. Glass material: high borosilicate glass 3.3

One of the best quality stoppers in the market, you will not be disappointed.

One of the best quality stoppers in the market, you will not be disappointed.

$50.00

$30.00

$45.00

Ai 250C Max Non-Mercury 14/20 Joint Glass Thermometer Ai 24/40 Thermometer Inlet Adapter with Sealing Gasket Ai 24/40 PennyHead Glass Hollow Stopper
Ai 250C Max Non-Mercury 14/20 Joint Glass ThermometerAi 24/40 Thermometer Inlet Adapter with Sealing GasketAi 24/40 PennyHead Glass Hollow Stopper

Glass material: high borosilicate glass 3.3

Glass material: high borosilicate glass 3.3

Glass material: high borosilicate glass 3.3

$30.00

$25.00

$20.00

Ai 24/40 Joint Glass Feeding Funnel with 4" Opening Ai Glass 3/8" Hose Barb Tee Adapter Ai 4 x 4" Stainless Steel Laboratory Scissor Jack
Ai 24/40 Joint Glass Feeding Funnel with 4" OpeningAi Glass 3/8" Hose Barb Tee AdapterAi 4 x 4" Stainless Steel Laboratory Scissor Jack

Glass material: high borosilicate glass 3.3

Glass material: high borosilicate glass 3.3

Minimum height 1.75", maximum height 6"

$30.00

$20.00

$39.00

Ai 6 x 6" Stainless Steel Laboratory Scissor Jack Ai 6 x 6" Aluminum Laboratory Scissor Jack 4 Prong Stainless Steel Clamp Opens to 3 1/2"
Ai 6 x 6" Stainless Steel Laboratory Scissor JackAi 6 x 6" Aluminum Laboratory Scissor Jack4 Prong Stainless Steel Clamp Opens to 3 1/2"

Minimum height 3", maximum height 9.5"

Minimum height 3", maximum height 15.25"

Adjustable from one side with a 6" rod

$59.00

$79.00

$25.00

Lab Stand Boss Head Clamp Pack of 5 Plastic Keck Clips for Flasks with 24/40 Joint Pack of 5 Metal Keck Clips for Flasks w/ 24/40 or 34/45 Joints
Lab Stand Boss Head ClampPack of 5 Plastic Keck Clips for Flasks with 24/40 JointPack of 5 Metal Keck Clips for Flasks w/ 24/40 or 34/45 Joints

 

 

 

$15.00

$10.00

$13.00

Ai GL16 Chilling Fluid or Vacuum Connectors - Pack of 5 Ai GL16 Cap for Chilling Fluid or Vacuum Connectors - Pack of 5 Lab 500mL to 2000mL Flask Cork Ring Stand
Ai GL16 Chilling Fluid or Vacuum Connectors - Pack of 5Ai GL16 Cap for Chilling Fluid or Vacuum Connectors - Pack of 5Lab 500mL to 2000mL Flask Cork Ring Stand

Fits our short path glassware and T1 cold traps.

Fits our short path glassware and T1 cold traps.

Fits round-bottom flasks

$20.00

$15.00

$5.00

KF25 Flexible Premium Stainless Steel Vacuum Bellow 3.3 Feet KF25/NW25 St St 3-Way Tee Flange for Secure Vacuum Connection
KF25 Flexible Premium Stainless Steel Vacuum Bellow 3.3 FeetKF25/NW25 St St 3-Way Tee Flange for Secure Vacuum Connection

Fits our AccuTemp and Elite series vacuum drying ovens (item# FVB-25-10)

 

$199.00

$59.00